Ultra-High Sensitivity capability. Examples of additional detectable targets: Disposable Razor Blades; Special metal items (e.g. AISI 300 series Stainless Steel); Bullets
Fully compliant with the NIJ-0601.02 and NIJ-0601.03 standards
The SMD®601 Plus further extends the detection sensitivity of the previous SMD®601 to metal threats before considered undetectable due to their minimal dimensions and metal composition similar to the ones specified in the new NIJ-0601.03 Standard.
Accurate detection of all metallic threat items
- Very accurate pinpointing of individual and multiple metal targets
- Quick, accurate analysis of all parts of the body of people in transit, from the shoe level to the crossbar
- Built-in programs to screen visitors and staff for weapons and contraband
New certified ip66 control unit enclosure
- Total compatibility with previous control units
- Robust structure through the use of high-performance polymers for the construction of housing
- Waterproof / Dustproof: IP66 compliant (IEC 60529)
- Exceptional impact resistance at low and high temperatures and resistance to corrosion from atmospheric agents
- Display made with specific polymer to improve the visibility of the LEDs by increasing the definition and clarity
Unique alarm signalling
- 20 vertical localization zones
- High visibility of the control unit and of the zone indication, independent from the operator position and the installation environment
- Flexible Acoustic Alarm Signalling System: 10 Continuous and Pulsed Tones; 34 Special Sounds
- 10 Alarm Volume Levels
- High Precision Transit Counter: In-Bound transits; Out-Bound transits; Alarm rate
Most powerful and versatile security features
- Over 40 built-in Security Programs: Up to 22 pre-programmed Security Programs; Up to 20 user programmable Security Programs
- Chip Card system for fast, simple and secure parameter changes (i.e. alarm volume and tone, counter reading, etc.) and security level selection.
- Any security standard can be enhanced with selectable random alarm probability
Chip card system
The system allows Security Management to set the Security Level quickly, reliably and without having to program the device in any way.
Download Specifications
Gate structure
- State-of-the-art, robust and washable panels
- Antivandalic and antitampering IP66 control unit
- Embedded high precision transit counters (2-beam photocells)
- Antitampering ON/OFF switch
- Protected against aging, weather and wear
Operational features
- High discrimination and transit flow rates five or more times greater than other metal detection systems
- Quick reset time as short as 0.2 seconds for high throughput rate
- Very high detection speed (50" ft/sec.)
- Built-in operational functional verification (OFV)
- One-touch key reading of inbound, outbound and Security Level Data
Quality
- Continuous self diagnostic system
- Proven reliability
- No periodic re-calibration and preventive maintenance required
- No scheduled maintenance
- Fully digital design
Alarm signalling
- Multi-zone display bar for “height on person” localization
- 20 vertical localization zones
- 2 display bars programmable as zone indicators and/or pacing lights
- Specific shoe alarm color indication
- Green and red metering signals proportional to the mass of the detected target
- 10 selectable continuous and pulsed tone plus 34 special tones
- 10 selectable sound intensities ranging from 0 to 90 dbA at 3.3 ft
- Random alarm capability with independent counters, alarm tone and alarm volume
- Met-Identity technology (separate Ferrous and Non-Ferrous alarm signaling)
Type of signalling
- Fixed or proportional to the mass in transit - visible from 19.7 ft under lighting of 4000lux
- 20 x4 distinct zones (20x2 entry side and 20x2 exit side)
Programming
- Over 40 built-in Security Programs
- Remote via Infrared Remote Control Unit, BT or Ethernet 10/100 base T (option) interface
- Security level: International Standard (IS) command / Chip card
- Local by Control Unit alphanumeric display and keyboard
- Programming and chip card access protected by user and super-user passwords
Installation data
- Automatic synchronisation between two or more metal detectors with distance of down to 2" without the use of external cables
- One Touch Automatic Self Installation (OTS)
Certification and compliance
- Fully compliant with the NIJ-0601.02 Standard requirements
- Complies with the applicable Standards for Law Enforcement and Correctional Facilities
- Compliant with applicable International Standards for electrical safety and EMC
- Compliant with the applicable electromagnetic Standards on Human Exposure and Pacemaker Safety
- Harmless to magnetic media (CD, tapes, etc.)
Environmental data
- Powered by safe low voltage DC through external switching power supply adapter
- Power Supply : 100…277V~ ±10%, 47…63Hz, 50 VA typical consumption
- Operating temperature: -4°F to 149°F (-34°F to 158°F upon request)
- Storage temperature: -34°F to 158°F
- Relative humidity: 0 to 95% (without condensation)
Comprehensive support
- CEIA USA provides full operational and technical training support by certified personnel either at CEIA facility or at customer site.
APSiM3Plus
Integrated Web-server & Logger, Battery Back-up and Charger
Part Code: APSiM3Plus/P
Crossbar battery back-up
Crossbar battery back-up in stainless steel case.
Part Code:
- 55681
- Protection cover: 75122
Embedded battery back-up and charger
Lower Connection Module with anti-tamper on/off switch, RS-232 interface and internal battery back-up. The module provides an audible ‘flat battery’ signal activated when the battery charge goes below the operational limit of the device
Part Code: APSM2Plus/P
IP65 Configuration
Outdoor sheltered permanent or non-sheltered short-term installations (single event entrance).
Chip cards
Integrated camera system
Part Code: 54253
IRC-1
Part Code: # 47180
Kit FGA and TFV
This test can be used by technical personnel to check the functionality of the metal detector quickly.
- AISI 420 sphere, ø44.45mm
- FGA test programming chip card ("Technical Level - FLOOR GAIN ADJUSTMENT")
- TFV test programming chip card ("Technical Level - FUNCTIONALITY VERIFICATION")
- Instructions for use
- Carrying case
Kit OFV
This test can be used by the operator to check the functionality of the metal detector quickly.
- AISI 420 sphere, ø44.45mm
- Programming chip card
- Instructions for use
- Carrying case
MBSU-2
Independent, long life power supply in weatherproof stainless steel case, with embedded fast charger
Part Code: # MBSU-2
MBSU-LWSC
Part Code: #MBSU-LWSC
MD-Scope
Part Code: # MD-SCOPE2
MD-WHK
Part Code: MD-WHK
Metal Detector Divesting Table
This accessory, designed to be positioned next to the walk-through Metal Detector, offers a surface for the temporary deposit of metal personal effects which are not of a dubious nature and thus not required to undergo X-ray analysis (coins, keys etc.).
The special shape of the surface helps to keep the objects deposited there away from the Metal Detector so as to avoid any possible interference.
Dimensions: 610 x 360 x 975 mm.
Part Code: 610mm # 18074
1200mm # 39491
Outdoor version 1200 mm # 67021
NIJ0601.02SO/MO -SK
Reference Samples for accurate verification of the Security Level. Includes guided procedures and certificate of calibration.
RCU2
Control unit for full remote access, including alarm signaling and programming of CEIA Walk Through Metal Detectors. The connection is performed via BT wireless communication (standard) or via cable connection.
Part Code: # RCU2
TDU
Part Code: TDU/P
Test samples kit Gun assembled
Reference Samples for accurate verification of the Security Level. Includes guided procedures and certificate of calibration.
Part Code: # EMD-SK-GAL
Test samples kit Gun Disassembled
Reference Samples for accurate verification of the Security Level. Includes guided procedures and certificate of calibration.
Part Code: # EMD-SK-GDML
Top Power Cable
TSU
Part Code: # TSU
Upper Connection Module
This extension cable allows the connection of power supply and serial communication to personal computers or CEIA accessories, such as RCU-2.
Part Code: # 46650
Wheel Kit - Long Range
The Transport and Stabilizing Device allows the Elliptic and Panel WTMDs to be easily transported with no need for the operator to disassemble the archway. In addition, the it provides archway stability.
The Device is applicable to Elliptic and Panel-Shape Walk-Through Metal Detectors.
The system has been found compliant for safety with applicable parts (a,b) of par. 7.4 Stability of the Standard EN61010-1:2010 (IEC61010-1:2010). However, it is always recommended that the archway is secured to the fl oor by means of anchors.
Part Code: # 70796
Brochure
Manuals
Certificates
Technical Drawings