Working Detection Principle |
- Wideband RF Complex Impedance measurement
- Multiple sensing technology
|
Inspection Characteristics |
- Commercial Bottles of any shape and in a wide range of dimensions can be analyzed with capacity ranging from 3.38 to 67.63 oz (100 ml to 2000 ml)
- Initial Start-up time: 15 sec. max
- Analysis type: automatic
- Analysis time: 5 sec. typical
|
Detectable substances |
- Combustible, flammable and explosive liquids
|
Alarm/No Alarm and Diagnostic Signalling |
- Visual, with display indication:
- Green “OK”
- Yellow “Diagnostic”
- Red “Alarm”
|
Operator interface |
- Easy to read high-contrast graphic display
- High durability stainless steel function keys
- Programmability of all the parameters protected by passwords
|
Function and calibration control |
- Automatic calibration, continuously running
- Manual verification of calibration, performed by the operator through Pass/No-Pass reference test pieces (according to the operational procedures)
|
Communication capability |
- RS-232 serial interface
- Ethernet network interface
|
Remote control and Ethernet Networking Functions available through the CEIA NetID management software |
- Programming
- Statistical Data Collection
- Maintenance
- Firmware upgrade
|
Overall Dimensions |
- 18.5” x 12.5” x 13” without external probe
- 21.5” x 12.5” x 13” with external probe
|
Weight |
- 35.7 lb without external probe
- 38.6 lb with external probe
|
Degree of protection |
|
Main Mechanical Features |
- Constructed entirely in AISI304 Stainless Steel
- Anti-fingerprint surface treatment
- Rugged and Durable
- Compact and Aesthetically pleasing
|
Main Electronics Features |
- High integration SMT
- 32-bit flash-based microcontrollers
- 32-bit DSP
- Low power and high reliability
- Very low power inspection field, confined in the analysis compartment, completely safe for both the operator and the liquid
- No ionizing radiation
- No radioactive sources
|
Installation and Maintenance |
- Automatic adjustment to environmental conditions
- No initial or periodic calibrations required
- Firmware upgradeable via RS232 or Ethernet interface
- No periodical maintenance or consumables required
- Built-in self-diagnosis system
|
Certification and conformity |
- Conforms to the currently applicable International Standards for Electrical Safety and EMC
|
Power Supply |
- 115/230V~ ±15%, 50/60 Hz ±10%, 15W
|
Environmental conditions |
- Operating temperature: 32°F to +104°F
- Storage temperature: 14°F to +140°F
- Operating Relative humidity: 0 to 95% (without condensation)
- Storage Relative humidity: 0-98%, without condensation
|
NATO Stock Number |
- 6665-151805235
- 6665-151805236
|
External probe (optional) |